Kenmore ULTRASOFT 400 625.3884 - Manual (Page 21)

JJJJJJJJJJJJJJJ
JJJJJJJJJJJJJJJ
JJJJJJJJJJJJJJJ SECTION 4 JJJJJJJJJJJJJJJ.
JJJJJJJJJJJJJJJ
JJJJJJJJJJJJJJJ.
KNOW ABOUT YOUR WATER SOFTENER
A. DIMENSIONS / SPECIFICATIONS
OTHER SPECIFICATIONS
Type of Ion exchange material (resin) -- high capacity
Amount of resin (cu ft)........................... 1.06
Regeneration (recharge) cycle times (minutes)
Fill (NaCL setting).......................... 3.6- 11.5
Fill (KCI setting)............................. 4.5 - 14.4
Brining / brine rinse ....................... 120- 135
Backwash....................................... 7
Fast rinse....................................... 3
Total regeneration time ®................. 133.6- 159.4
Efficiency Rating (gr/lb at 3.1 lb salt
dose)..................................................... 5350
gpm
2
gallons per minute
psi
2
pounds per square inch
gpg
2
grains per gallon
ppm
2
parts per million
© Does not include CLEAN feature cycle times if set to
ON.
This system conforms to ANSI/NSF 44 for the specific
performance claims as verified and substantiated by test
data.
The efficiency rating is only valid at the stated salt dose.
These softeners were efficiency rated according to ANSI/
NSF Standard 44.
4
-
2