Pioneer DVD-ROM DRIVE UNIT DVD-D302 - Manual (Page 2)

A RADIO SIGNAL INTERFERENCE - This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful Interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
!=> Reorient or relocate the receiving antenna.
1 ^ Increase the separation between the equipment and receiver.
■=> Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
■=> Consult the dealer or an experienced radio/TV technician for help.
Th/s device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (V This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
[For Canadian model]
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
[Pour le modèle Canadien]
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the
user's right to operate the equipment.
The Generation of Acoustical Noise Is Less Than 70dB.
(IS07779/DIN45635)
IMPORTANT
CAUTION
This product contains a laser diode of higher class than
1. To ensure continued safety, do not remove any
covers or attempt to gain access to the inside of the
product.
Refer alt servicing to qualified personnel.
The following caution label appears
on your unit.
Location; on top of the cover
CLASS 1 LASER PRODUCTI
LASER KLASSE 1
For pluggable equipment the socket-outlet shall be installed near
the equipment and shall be easily accessible.
SAFETY INSTRUCTIONS
To ensure your personal safety and to maximize the full operating potential of your
Drive, read and follow these safety precautions:
ARRANGEMENT - This unit can be used only horizontally. Vertical use is not
possible.
ENVIRONMENT - Please do not use the unit at places with much dust, high
temperature, or high humidity. Please use the unit at a place where it is not
subjected to vibrations or shocks,
POWER - Power-off your systenn and attached hardware devices before
installation.
READ INSTRUCTIONS - Read all safety and operating instructions before the
Drive is operated.
RETAIN INSTRUCTIONS - Retain the safety and operating instructions for future
reference.
FOLLOW INSTRUCTIONS - Follow all operating and use instructions.
HEED WARNINGS - All warnings must be adhered to,
CLEANING - DO NOT use liquid or aerosol cleaners and only use a damp cloth to
clean the exterior housing.
WATER AND MOISTURE - DO NOT use this product near water,
POWER SOURCES - Operate this product from the type of power source indicated
on the marking label. If you are not sure of the type of power available, consult your
Authorized Pioneer Dealer.
OVERLOADING - DO NOT overload wall outlets and extension cords. Doing so can
result in fire or electric shock.
OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product.
Touching dangerous voltage points may cause a short resulting in fire or electric
shock. Do not spill liquid of any kind on this product.
CONDENSATION - Moisture will form in the operating section of the product
causing performance to be impaired if it is brought from cool surroundings into a
warmer environment. If you are moving the unit to a location with a warmer
temperature, let the product stand for 1 -E hours In the new location before turning
it back on.
SERVICING - Do not attempt to repair this product yourself. Opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel. (Refer to the enclosed Service and Support Card.)
FEATURES OF THE REPLACEMENT DVD-ROM DRIVE
5 ^«fflDVD-ROM
High transfer rate (Sustain )
max. 3,300 K Byte/sec. (DVD-ROM)
max. 3,000 K Byte/sec. (CD-ROM)
Access time: Random avg. 150 ms
(DVD-ROM)
SCSI2 interface
SCSI bus terminator
Multi-session compatibility
512-byte block compatibility
CD-DA (audio CD) playback capability
(Пт'ТУ)
Й:/р3.300 KByte/sec (DVD-ROM)
gF*p3,000 KByte/sec (CD-ROM)
О 150msec
(DVD-ROM)
SCSI 2 -{УУ~Ут-УШт
SCSI
УПТ т ' у У в УШ^
512 lU ПП'уУМт
CD-DA Czt-T-VzbCD) (Dmnim