Curtis RCD858 - Manual (Page 12)

LISTENING TO PROGRAMMED TRACKS
Program your selection of tracks by following the procedure shown above.
Press the PLAY/PAUSE Button.
Disc play will start at the beginning of the first programmed track.
TO CLEAR THE PROGRAMMED MEMORY
If the disc is playing, press the STOP Button.
Press the STOP Button again. All the programs will then be erased from memory.
The program memory will also be cleared if the Function Selector is changed to
another function, or if the power is switched off.
LISTENING TO TAPE
INSERTION AND REMOVAL OF CASSETTES

Press the Stop/Eject Button to open the Cassette Door.
 Slip your cassette tape into the cassette door with the exposed section of tape at
the bottom and the playback side facing you.
 Close the Cassette Door securely before starting.

When finished, press the STOP/EJECT Key to open the Cassette Door, and retrieve
your cassette tape.
PLAYING TAPES
 Select the TAPE Option using the FUNCTION Selector.
 Insert your cassette tape.
 Press the PLAY Key to start the tape.
 Use the PAUSE Key whenever you want to suspend playback.
 Press the STOP/EJECT Key when finished.
RECORDING
RECORDING FROM THE RADIO
 Select the AM or FM STEREO Option using the FUNCTION Selector.
 Tune in your station and insert a cassette tape into tape deck.
 Press the RECORD Key and the PLAY Key at the same time to start recording.
 Press the STOP/EJECT Key when finished.
RECORDING FROM CD
 Select the CD Option using the FUNCTION Selector, and insert your disc.
 Press the RECORD Key and the PLAY Key at the same time to start recording.
 Press the CD PLAY/PAUSE Button to start the disc.
 Press the STOP/EJECT Key when finished.
- 11 -