Setting cooktop controls, Minute timer, Locking the controls – Kenmore 790.4292 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Cooktop Controls

Minute Timer

The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep
track of time from 1 to 99 minutes. The Alpha-Numeric display located to the left of the Timer UP/DOWN arrow key pads
will begin to count down minutes once set.

To Set the Minute Timer:

1. Touch the iisted under the word “TIMER”. Touching and releasing the

<5)

or the

(S)

key pads will

increase or decrease the Minute Timer setting by 1 minute with each key press (up to

minutes).

2. Once the Timer Alpha-Numeric displays the desired amount of time, release the UP or DOWN Arrow key pads. The

MinuteTimer will begin the countdown with remaining minutes. The timer will display seconds coutdown for the last

minute. Once the Minute Timer reaches 00 a long beep will sound each minute and the timer Alpha-Numeric display

will flash “00” indicating that the time is up.

To Cancel the Minute Timer:

1. Touch the

and

(S)

key pads at the same time or touch and hold either the or

(2)

key pad and scroll

2. If cancelling the Minute Timer using the scrolling method, once the Main Control Alpha-Numeric display reaches 00,

release the Arrow key pad.

3. The set time will disappear from the LED indicating that the MinuteTimer is no ionger active.

Locking the Controls

The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.

To Turn ON the Controls Lock Feature:

1. The Cooktop Lock will not activate until the cooktop is OFF. If the cooktop power is not OFF, touch and hold the

key pad until a beep sounds (about 1 second). The Power LED located above the

key pad will turn

OFF.

2. Touch the (D key pad until a beep sounds (about 5 seconds). The Lock LED above the

key pad will turn

ON indicating the cooktop is iocked. This will keep any Cooking Zone or Cooktop functions from being accidentally
turned ON (See Fig. 2, page 6)

To Turn OFF the Controls Lock Feature:

1. Touch the

key pad until a beep sounds (about 5 seconds). The Lock LED above the

key pad will turn

OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be used
(See Fig. 1, page 6).

2. If the cooktop is needed you must touch and hold the

key pad until a beep sounds (about 1 second). The

Power LED located above the C^w^ key pad will turn ON. (See Fig. 4, page 6). You may now activate any of the

Cooking Zones.

This manual is related to the following products:

790.4283