Know about your water softener, Pii^ei^sions, Specifications – Kenmore 625.3882 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
f J J.ÌJ.JJ J J,iJ
U J J J J J J J J
IJ.JJ J J.ÌJ.JJJ J.iJ
SECTION 4
J.ÌJ.JJ J J.ÌJ.JJ J j,„
J J J J J J J J J J J J J J
J.ÌJ.JJJ J.ÌJ.JJJ j.„
KNOW ABOUT YOUR WATER SOFTENER
PII^EI^SIONS /
specifications
OTHER SPECIFICATIONS
Type of ion exchange material (resin) --
high capacity
Amount of resin (cu ft)...................................
0.87
Regeneration (recharge) cycie times (minutes)
Fill..........................................................
3 - 9.48
Brining / brine rinse...............................
91 - 100
Backwash .............................................
7
Fast rinse...............................................
3
Total regeneration time ®---------------------
108- 118
Efficiency Rating (gr/lb at 2.6 lb salt
dose)..............................................................
5060
gpm = gallons per minute
psi = pounds per square inch
gpg = grains per gallon
ppm = parts per million
® Does not include CLEAN feature cycle times if set to
ON.
This system conforms to ANSI/NSF 44 for the specific
performance claims as verified and substantiated by test
data.
The efficiency rating is only valid at the stated salt dosage.
These softeners were efficiency rated according to ANSI/
NSF Standard 44.
4
-
2