Kenmore HE2 110.9656 - Manual (Page 17)

Cycle tips
■ Dry most loads using the preset cycle settings.
■ Refer to the Auto Cycles or Timed Cycles Preset Settings
chart (in the “Cycles” section) for a guide to drying various
loads.
■ Drying temperature and Dryness Level are preset when
you choose an Auto Cycle. You can select a different
dryness level, depending on your load, by pressing
Dryness Level and choosing More or Less.
NOTE: You cannot use the Timed Cycle Adjust and you
cannot modify temperature with the Auto Dry cycles.
■ If you wish to adjust the cycle length of a Timed Cycle,
press More Time or Less Time. Adjust the temperature of
a Timed Cycle by pressing TEMPERATURE until the
desired temperature Is selected.
NOTE: You cannot use the Dryness Level with Timed
Cycles.
Clothes Dry
The Clothes Dry light Illuminates when the drying cycle is
finished. This indicator stays on during WRINKLE GUARD®.
WRINKLE GUARD®
The WRINKLE GUARD® light illuminates when this option is
selected. This indicator stays on with Clothes Dry.
Check Lint Screen
The Check Lint Screen light Is a reminder to check to see
whether the lint screen needs to be cleaned. The Check Lint
Screen light will come on when the machine is turned on. The
light will flash until the cycle is started or the door is opened.
Indicator lights
Other indicator lights show Cycle, Options and Modifier settings
selected.
Follow the progress of your dryer with the drying Status indicator
lights,
STATUS
Weti
Damp I
Cool Down
Clothes Dry {
Wrinkle Guard
Controls Locked #
Check Lint Screen #
Wet
The Wet light illuminates at the beginning of an Auto Cycle if a
wet item is detected.
■ In an Auto Cycle, if a wet item is not detected after
approximately 5 minutes, the dryer goes directly into Cool
Down and the Cool Down and WRINKLE GUARD® indicators
illuminate, if selected.
■ In a Timed Cycle, wet items are not detected. The dryer will
continue to run for the length of time selected, and the Wet
light will illuminate. The damp light will not illuminate.
Damp
The Damp light illuminates in an Auto Cycle when the laundry is
approximately 80% dry.
Cool Down
The Cool Down light illuminates during the cool down part of the
cycle. Laundry cools for ease in handling.
Select the drying cycle that matches the type of load you are
drying. See the Auto Cycles Preset Settings chart or the Timed
Cycles Preset Settings chart.
AUTO
CYCLES Delicate
TIMED
CYCLES
Heavy Duty
Express
Dry
Toudi Up
Auto Cycles
Auto Cycles allow you to match the cycle to the load you are
drying. See the following Auto Cycles Preset Settings chart. Each
cycle dries certain fabrics at the recommended temperature. A
sensor detects the moisture in the load and automatically adjusts
the drying time for optimal drying.
Heavy Duty
Use this cycle to get high heat tor heavy fabrics such as cotton
towels or bedspreads.
Jeans
Use this cycle to get medium-high heat tor drying denims.
Normal
Use this cycle to get medium heat for drying sturdy fabrics such
as sturdy work clothes.
Casual
Use this cycle to get low heat for drying no-iron fabrics, such as
sport shirts, casual business clothes and permanent press
blends.
Delicate
Use this cycle to get extra low heat for drying synthetic fabrics,
washable knit fabrics and no-iron finishes.
17