Kenmore POWER MISER 153.320390 HT 30 GAL - Manual (Page 5)

Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi­
als, depending on your type of installation.
EMCfrfe
Wttmr Heater
fnats/Artfon
Kit
IJI
It
Jt
t«
Lcl.
WATER HEATER HEAT TRAPS
HELP REDUCE HEAT LOSS DUE
TO THERMAL SYPHONING
20" DIAMETER DRAIN PAN
FOR WATER HEATERS 18" IN
DIAMETER AND UNDER
WATER HEATER INSTALLA­
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3/4" OR
1/1" THREADED OR COPPER
PLUMBING
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE
IN 1 GALLON AND 5 GALLON CAPACITY
THROUGH LOCAL SEARS SERVICE
CENTERS
28" DIAMETER DRAIN PAN FOR
WATER HEATERS 26" IN
DIAMETER AND UNDER
Bask Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local
Sears score. ,
Pipe Wrench (2)
Screwdriver
6 Foot Tape or Folding Rule
Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREW DRIVER
PHILLIPS screwdriver
PIPE
WRENCH
c.
PIPE DOPE
(SQUEEZE TUBE)
. ROLL OF TEFLON TAPE
(Use only on water connections)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
HACKSAW
3/4" WIRE BRUSH
1/2" WIRE BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
id
ROLL OF EMERY
CLOTH
SOLDER
FLUX
\
PROPANE TORCH
TUBING
CUTTER