Kenmore 587.15072 - Manual (Page 9)

Operating Instructions
(continued)
Cycle Chart
Cycle To Select Cycle Soil Level Water
(approx.)
Time*
(minutes)
Washes/
Rinses
For pots, pans,
1
P ots
| casseroles and
dinnerware with dried-
on or baked-on soils.
Select POTS PANS and desired
OPTIONS.
HI-TEMP SCRUB and SANITIZE
will automatically be provided. Heavy and
Medium 9.7 gal.
36.7 liters
115 2 washes
6 rinses
Light 7.3 gal.
27.6 liters
95 2 washes
4 rinses
For regularly
i soiled dishes and
\ WASH#
silverware.
Select NORMAL WASH and
desired OPTIONS. Heavy 8.5 gal.
32.2 liters
105 2 washes
5 rinses
Medium 7.3 gal.
27.6 liters
95 2 washes
4 rinses
Light 4.9 gal.
18.5 liters
75 2 washes
2 rinses
For lightly soiled
/ L ight
\ and pre-rinsed
' dishes and
silverware.
Select LIGHT WASH and
desired OPTIONS. Heavy 8.5 gal.
32.2 liters
105 1 wash
6 rinses
Medium 6.1 gal.
23.1 liters
85 1 wash
4 rinses
Light 4.9 gal.
18.5 liters
75 1 wash
3 rinses
For lightly soiled or
1 W ater
1
pre-rinsed dishes and
silverware. This cycle
uses less hot water.
Select WATER MISER and
desired OPTIONS. 3.7 gal.
14.0 liters
65 1 wash
2 rinses
For rinsing dishes
f
Q uick
1
that will be washed
later.
Select QUICK RINSE.
DO NOT USE detergent. 2.5 gal.
9.5 liters 18 2 rinses
iHl-TEMP
,SCRUBi
Option Selections
Hi-Temp Scrub
When HI-TEMP SCRUB option is selected,
the dishwasher heats the water in the main
wash to approximately 145°F (63°C).
This increase in water temperature helps dishwasher
detergent remove food grease and soil from dishes
more effectively and aids in drying. HI-TEMP SCRUB
option can be used with all cycles except WATER
MISER and QUICK RINSE. HI-TEMP SCRUB is auto­
matically provided when POTS PANS cycle is selected.
When HI-TEMP SCRUB option is selected, the light
above the pad will come on and remain on until end of
cycle. To turn off the HI-TEMP SCRUB option, press the
pad a second time. The light above the pad will turn off.
Includes dry time.
Sanitize Option
To sanitize your dishes and glassware,
[SANmzE) select the SANITIZE option.
When selected, the light above the pad will come on
and remain on until end of cycle. The water
temperature in the final rinse will be raised to 155°F
(68°C) and will maintain that temperature for 9 minutes.
This option is available in Pots Pans, Normal and Light
Wash cycles.
The cycle time will be extended until the proper water
temperature is reached. Washing action will continue
during the water heating delay. For best results, the
incoming water temperature should be 120°F (49°C).
The sanitize criteria may not be satisfied if there is an
interruption of the cycle, power failure or if the incoming
water temperature is below 120°F (49°C).
To turn off the SANITIZE option, press the pad a
second time. The light above the pad will turn off.