Kenmore ULTRA WASH 665.1404 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PROBLEM

SOLUTION

ETCHING (PERMANENT

This is an erosion of the surface of the glassware and can be caused by a combination of:

CLOUDINESS)

water that is too hot, from using too much detergent with soft water or by pre-washing.

Detergent needs food soil to act upon. If etching has occurred, the glassware is

permanently damaged. To avoid further etching, adjust the detergent amount to match the

water hardness, stop pre-washing, and use water heating options only when incoming

water temperature is below 120°F (49°C).

LEAKING WATER

Be sure dishwasher has been installed properly and is level.

Suds can cause the dishwasher to overflow. Measure the detergent accurately and use only

detergents designed for use in a dishwasher. Less detergent is needed in soft water. Try

another brand of detergent if sudsing continues.

To avoid rinse aid leaking from the dispenser, be sure the lid is securely attached and avoid

overfilling.

TUB IS DISCOLORED

NOTES:

■

High iron content in the water can discolor the tub.

■

Tomato-based foods can discolor the tub or dishware.

A citrus-based cleaner can be used to clean.