Converting the lower element (cont’d), Awarning, A caution – Kenmore POWER MISER 153.316555 User Manual
Page 12: Converting the lower element -12, Installation instructions (contad)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation Instructions (contad)
Converting the Lower
Element (cont’d)
9. Replace terminal cover on thermostat making sure that the
locking tabs on the terminal cover are in place.
12
,
Complete wiring to the water heater, or if completed, turn
“ON” electric power to the water heater after filling the
tank with water.
AWARNING
Make sure the thermostat is flush against the tank, the
terminal cover is in place, and the insulation is replaced.
Failure to do so can result in DEATH, SERIOUS BODILY
INJURY, OR PROPERTY DAMAGE.
10. Replace the insulation block so that it completely covers
the thermostat and element.
■ hii-BliT
fell II1
■ fl'”ll«B II 1
■ n ll-B H I
■ ini>a
■ ii‘ii*iii'i
■ IHi A CAUTION Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating ele ment, the tank must be filled with water. Water must flow from the hot water faucet before turning "ON” power. 11. Replace the access panel. 12