Kenmore 16791 - Manual (Page 16)

Options
r
QsfftGuMr^SytìBm
/--------------
• • •
CYCLES
- - - Ì
OPTIONS
I MTS
I nun
PtOniAL WATW ^
mea □ q ,„ J
1 WWrDI
1 HEiKT
MOHEirrl RCSCT 1
DRY OFTlOMl
1 ___________
J
U№*№nA
Option When should 1 use it? What does it do?
Water Heat
• Automatic with Pots & Pans
• Option for Normal Wash,
Water Miser, and China*Light
cycles
• Not available for Quick Rinse
cycle
To ensure water temperature in
Main Wash reaches 135°F
(57“C).
• When you select Water Heat, main wash
delays until water heats to 135°F (57°C).
• As water heats, washing action continues.
Timer Knob pauses and Water Heating status
indicator glows until water reaches proper
temperature.
No Heat Dry
• Option for Pots & Pans,
Normal Wash, Water Miser
and China*Light cycles
Use when you do not need a
rapid dry cycle. Allow longer
drying times (overnight). Use
rinse agent to improve drying.
• Turns off heating element in 30-minute dry
period.
Reset Options To change option selection. • Cancels any previously selected options.
Delay Wash
• Option for Pots & Pans and
Normal Wash.
• Not available for Quick Rinse,
Water Miser, and China*Light
cycles
Use when you want to start a
cycle later.
Set delay to run dishwasher
during times when off-peak
utility rates are in effect or
when you are away from home.
Local utilities recommend this
to avoid heavy usage of energy
at certain times of day.
• Delay beginning of your selected cycle and
options for up to 5 hours.
• To set;
1 . Close the door firmly until you hear it latch.
2. Select the desired Cycle and Options.
3 . Turn Timer Knob to the number of hours
you want dishwashing to be delayed. The
Delay Wash status indicator will glow.
• If you wish to put more dishes in the dish­
washer while it is in delay mode, be sure to
latch the door after you add them. The Timer
Knob will not advance unless the door is
latched. The amount of delay can be
changed or canceled at any time before
the cycle begins.
15