A. troubleshooting – Kenmore 625.348235 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5
SERVICE TECH. INFORMATION
A. TROUBLESHOOTING
FACEPLATE REPLACEMENT: BE SURE THE VALVE IS IN SERVICE POSITION (OBSERVE VALVE
CYCLE INDICATOR) WHEN REPLACING THE EACEPLATE.
If after installing and programming the replacement faceplate, the valve is not in
service position, do the following to assure correct cycle orientation, or timing,
between the faceplate and valve.
Use the MANUAL ADVANCE procedures, page 5-3. With the the RECHARGE
button, advance through the recharge cycles until the valve stops in service posi
tion, and RECHARGE no longer flashes in the timer.
NOTE: The valve motor may automatically drive through several valve positions
while searching for service.
5-4
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line