Operating instructions, Wash delay, Operating instructions -9 – Kenmore 587.161500 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Instructions
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See
Cycle Chart) or number of hours for wash
delay.
5. Select desired OPTIONS (See Option
Selections). The indicator will show red
when selected.
6. If using WASH DELAY, go to step
numbers.
7. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
8. To start, close door to latch.
Plate Warmer
For warming dishes and serving plates before serving
hot foods:
• Load clean plates and dishes to be warmed.
• Turn dial to PLATE WARMER.
• Select HEAT DRY option.
Status Indicator Lights
When DELAY START option is selected, the Delay Start
light will glow as timer counts down to begin cycle.
The WASHING LIGHT comes on at the beginning of the
cycle and remains on until the end of the main wash.
CLEAN light comes on when a cycle is complete. To
turn it off, turn dial slightly until light goes off.
Wash Delay
Allows you to delay starting the HEAVY WASH cycle.
•
Turn dial to select number of hours.
•
Select HIGH TEMP WASH option and otherdesired
options.
•
Close doorto latch.