Kenmore ENVIROSENSE 85500 - Manual (Page 5)

OPERATION
AUTOMATIC OPERATION
The unit is set to default to Automatic operation when It is first fumed on. The air cleaner
will automatically sense to the amount of impurities in the air, and adjust the fan speed
accordingly.
AUTOMATIC
TURBO
SLEEP
PARTIS
BUMKING
HIGH
LOW
MEDIUM
MANUAL OPERATION
After you turn on the unit, you can switch
to manual operation by pressing the FAN
CON IROL buttons on the remote, or the
FUNCTION button on the unit.
• SLEEP
The ufHt will wortc in ultra-quiet mode.
- LOW, MEDIUM, AND HIGH
These levels are recommended for
standard, daytime use, HIGH will activate
automatically when sertsors detect high
levels of dust or odors.
■ TURBO
TTie TURBO level, the highest fan speed,
can be activated manually for maximum
air circulation.
* PLASMADOCTOR«*
Turn on the PlasmaDocfor by pressing
the PLASMA CONTROL button on the
Remote, or the FUNCTION button on the
unit. The PlasmaDocfor generates
positive and negative ions.
DUST AND ODOR SENSORS
The dust and odor sensors show three
levels of air cieanliness—green, orange,
and red. The greca tight indicates clean
air, the orange light Indicates unclean air,
and the red light indicates very undean air.
If the unit is set to Automatic operation, It
wBI change fan speeds to compensate for
different levels of air pollution.
LOW HIGH
Indoor Dust Voluma
0 0©
LOW HIGH
Indoor Odor Volume
Odor Sensor
The odor sensor responds to cigarette
smcriie and pet odors, as well as other
air contaminants such as insecticides,
cosmetics, alutohul, or aerosol sprays.
Dust Sensor
The dust serisor detects particles in the air
sucit as cigarette smoks, dust, and pollen.
TIMER
Set the timer for 1,4, or 8 hours by pressing the OFF TIMER button on the Remote or the
unit. The unit will stop operating when the set lime is up. Cancel the timer by pressing the
OFF TIMER button until the 1-, 4-, and 8-hour indicator light on the unit disappears.
1 hour-—►4 hour ► 8 hour ' ► Cancel
85500
DUST
POLLUTION CHANGE
l.evSL FILTER
INDICATOR INDICATOR
OFF CHANGE
TIMER HUEK
BUTTON INDICATOR
8S5D1
FUNCTION
BLTrrON
RFMOTE ODOR POWER
CONTROL SENSOR BUTTON
RECEIVER
POWER
BUTTON
DUST
SENSOR
CARE AND MAINTENANCE
CLEANING
• Clean unit as necessary
by wiping with a dry, soft
cloth; for stubborn stains,
use a warm, damp cloth.
Do not use volatile fluids such as
benzene, paint thinner, or scouring
powder, as they may damage the unit
surface.
• Keep the unit dry.
• Clean the wall behind the air outlet
periodically, as It may become dirty.
Filter Cassette Replacement
The CHANGE FILTER INDICATOR will
signal when to replace the filter cassette.
The replacement period wtli vary depending
on the hours of use, air quality, and location
of the unit. However, most fillers in normal
use need to be replaced annually.
TI
o>