Remote control operation preparation, Product specifications, Air cleaner features – Kenmore ENVIROSENSE 85500 User Manual
Page 3: Remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/665426/3/background.png)
PRODUCT SPECIFICATIONS
85501
85500
Room Size
210 sq. ft.
280 sg. ft.
Power Supply
AC 120V/e0(Hz)
AC 120V/6O(Hz)
Power Rate
Low 6W, Turbo 20W
Low OW, Turbo 26W
Fan Speed
4 Speeds
4 Speeds
Display
Digital
Digital
Control Type
Auto/Manual
Auto/Manual
Timer
1,4,8 hour(s)
1,4,8 hourfs)
Sleep Mode
Yes
Yes
Remote Control
Yes
Yes
Dust Sertsor
Yes
Yes
Odor Sensor
Yes
Yes
Filters
1 Replaceable Cesseite
1 Replacteebte Cassette
Cleaniftg System
Pre-Filler / True HEPA Filter /
Washable Nano-Silver/Carbon
Filter / PtasmaOoctor™
Pre-Filter / True HEPA Filter /
VWshaUe Nano-Silver/Carbon
Filter / PlasmaDoctor“
CADR
SmcAe/Dusl/Polten (135/140/
145)
Smoka/Dtisl/Pollen (180/100/
180)
Primery Filter
True HEPA Filter
True HEPA Filter
Ion Generator
PlasmaDoctor™
PlasmaDoctor™
Color
Metallic Blue
wietalllc Blue
Dimension
13,8”(W)X8.1"(D)X18.5"(H)
16.3* (W) X 8.5" (D) X 21 7" (H)
Weight
13.2 lb
17.01b
AIR CLEANER FEATURES
Note; The features of your air cleaner may
vary according to model,
' Ultra-Quiet Operation
This Kenmore air cleaner has a four-
speed fan with ultra-quiet operation that
is ideal for nighttime operation.
* Easy Maintenance
Kenmore air cleaners are simple and
economical to mainlain. For optirnuin
performance, replace the Pre-Filter,
True HEPA Filter, and the Washable
NanD-Silver/Carbon Filter once yearly.
These tillers are sold together tn one
convenient cassette.
inviroSense™
Kenmore sir cleaners have digital
sensors that delect the presence
of dust and odors in the air, The unit
automatically iiicreases fan speed to
clean mere air volume and remove the
impurities quickly.
Simple Operation
Kenmore air deaners have a remote
control and user-friendly display for your
convenience.
FIVE-STAGE CLEANING
Air undergoes five separate processes
before returning, freshened and cleaned, to
the room.
• Washable Pre-Filter
This reusable filter coBecis large
particles, pollen, pel hair, lint, etc,
• True HEPA Fitter
Captures 99,99% of particles and
Impurities as small as .03 microns.
■ Nano-Sllver Filter
A shield of silver particles one billionth of
a meter in size.
Washable Carbon Filter
Activated granular carbon effectively
collects chemical vapors and odors
caused by cigarette smoke, organic
decay, and cooking.
PlasmaDoctor™
In the final stage of cleaning, the
PlasmaDoctor generates positive
and negative ions.
REMOTE CONTROL
REMOTE CONTROL OPERATION
Preparation
• Press and slide the back o)ver of tha
remote to remove.
• Insert batteries as shown.
• Close the back cover.
Battery Use
’ The batteries for the remote control are
for initial use only. Change the batteries
when necessary.
• When replacing the batteries, replace
both at once with 2 new AA batteries.
• Incorrect battery usage may cause
battery fluid leakage and/or damage.
• When not using the remote control for
ah extended period of time, remove the
batteries.
• Avoid dropping or damaging the remote
control. Keep remote coirirol away from
direct sunlight or heaters.
Note; This equipment has been tested
and found to comply with the limits
for a Class B digital device, pursuant
to 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential instatlatiori. This equip
ment generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance wilti
the Instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particu
lar installation. If this equipment does
cause harmful interference to radio or
television reception, which can be de
termined by turning the equipment off
and on, the user Is encouraged to try
to comets the interference through one
or more of the following meaeunes:
< Reorient or relocate the receiving
antenna.
• Increase the distance between the
equipment and receiver.
• Connect the equipment to an
outlet on a circuit different from that
to which tee receiver is connected.
• Consult an experienced radio/TV
technician for help.
TJ