Replacing the carbon filter cartridge (cont.), Service check list – Kenmore 625.34551 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REPLACING THE CARBON FILTER

CARTRIDGE (cont.)

To replace the cartridge, follow

steps 1'6 on page 3. Be sure to clean
the inside of the sump. Cleaners are
available from Sears (see the parts
list on page 7), or use hot, soapy wa

ter. After replacing the cartridge,
flush the cartridge for 2 - 3 minutes
to remove harmless carbon fines (see
note on page 5).

SERVICE CHECK LIST

Filtered water has bad
taste and/or odor

The carbon cartridge needs replacing.

Fine, black particles In
filtered water.

This is harmless carbon “fines" from a new

cartridge. Discard the first few cupfuls of fil
tered water after changing the cartridge.

No water flow from the

filter.

- Cold water faucet and/or diverter valve not

opened.

- Supply tubing, from diverter valve to filter,
pinched or plugged.
- The carbon cartridge needs replacing.