Defrost control, Installing your dehumidifier, Choosing the proper location – Kenmore 580.513 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLING YOUR DEHUMIDIFIER
Install the dehumidifier on a level floor strong
enough to support the unit \with a full bucket
of water.
■ For best performance, allow at least 12-18
inches of air space on ail sides of the unit for
good air circulation.
' Keep all outside doors, windows, and other
openings closed when operating the
dehumidifler. Humid outdoor air will add to the
unit's work load.
■ Install your dehumidifier in an area where the
temperature will not fall below 65°F (IS^C). At
temperatures below this, the coils can
become covered with frost.
DEFROST CONTROL
When the defrost control senses frost build-up
on the evaporator coil, it will automatically
shuts off the compressor. The fan will continue
to cycle on and off to draw air across the coil
and melt the frost. When the coil is defrosted,
the compressor will automatically restart and
dehumidifying resume.
J-65'F
i 08'C)
CHOOSING THE PROPER LOCATION
Use the dehumidifier in a basement to help
prevent moisture damage.
Use the dehumidifier in cooking, laundry,
bathing, and dishwashing areas that have
excessive moisture.
Use the dehumidifier to prevent moisture
damage anywhere books or valuables are
stored.
- 7 -