Troubleshooting – Kenmore 625.38156 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Troubleshooting

Problem: Water leaking from faucet airgap hole.

Cause:

Drain side of faucet airgap (3/8" biack tub

ing) plugged, restricted or incorrectly con
nected to drain point.

Correction:

Inspect and eliminate restriction or piug. Refer to instaiiation

instructions for proper drain connection.

See page 9.

Problem: Faucet LED indicator light does not function after battery change.

Cause:

Battery dead.

Correction:

Replace with new battery.

See page 21.

Cause:

Battery installed incorrectly.

Correction:

Install battery correctly.

See pages 13 or 21.

Problem: Water leaks at push connect fittings

Cause:

Tubing not cut square.

Correction:

Cut tubing square.

See page 14.

Cause:

Tubing not pushed in aii the 'vvay.

Correction:

Push tubing in aii the way.

See page 14.

Cause:

Tubing nicked.

Correction:

Remove tube from connection. Remove nicked portion by cutting

tube to shorter length. Re-insert in connection.

See page 14.

Cause:

Outer tubing surface finish not smooth.

Correction:

Remove tube from connection. Remove problem area by cutting

tube to shorter length. Re-insert in connection.

See page 14.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com