Kenmore 87133 - Manual (Page 13)

CLEAHING AND CARE
1. Turn off the oven and remove the power
plug from the wall socket before cleaning.
2. Keep file irsfde of the oven clean. When
food splatters or spilled liquids adhere to 7-
oven walls, wipe with a damp doth. MiU
detergent may be used If the oven gets
very dirty. Avoid the use of spray and other e.
harsh cleaners as they may stain, streak
or dull the door surface.
3. The outside surfaces should be cleaned
with a damp doth. To prevent damage to
the operating parts inside the oven, water
should not be allowed to seep Into the
ventilation openings.
4. Wipe the window on both sides with a В
damp doth to remove ariiy spills or
spatters.
5. Do not allow the control panel to become
wet. Clean with a soft, damp cloth. When
cleaning the control рапеЗ, leave oven
door open to prevent oven from 10,
accidentally turning on.
e. If steam accumulates inside or around the
outside of the oven door, wipe with a soft
cloth. This may occur when the microwave
oven is operated under high humidity
oonditiorks. In such case, rt is normal.
It is occasionally necessary to remove the
glass tray for cleaning. Wash the tray in
warm sudsy water or in a dishwasher.
The roller ring and oven floor should be
cleaned regularly to avoid excessive nclse.
Simply wipe the bottom surface of the
oven with mild detergent. The roller ring
may be washed in mild sudsy water or
dishwasher When removing the roller ring
from cavity floor for cleaning, be sure to
replace in the proper position.
Remove odors from your oven by
combining a cup of water with the juice
and skin of one lemon in a deep
microwaveable bowl, microwave for 5
minutes. Wipe thoroughly and dry with a
soft cloth.
When it becomes necessary to replace the
oven light, please consult a dealer to have
it replaced.
BEFORE YOU CALL FOR SERVICE
IF THE OVEM FAILS TO OPEFiATE
1. Check to ensure that the oven is plugged
in securely. If it is not, remove the plug
from the outlet, wait 10 seconds, and plug
it in again securely.
Check for a blown circuit fuse or a tripped
main circuit breaker. If these seem to be
operating properly, test the outlet with
arrother appElance.
Check to ensure that the control panel is
programmed correctly and the timer is set.
2.
3,
4. Check to ensure that the door Is securely
closed engaging the door safety lock
system. Otherwise, the microwave energy
wi 11 not flow I nto the oven.
IF NONE OF THE ABOVE RECTIFY THE
SITUATION, THEN CONTACT A QUALIFIED
TECHNICIAN. DO NOT TRY TO ADJUST OR
REPAIR THE OVEN YOURSELF.
/!