Do not, Canceling a cycle, To stop the drain – Kenmore 790.16777 User Manual
Page 15: To clear the indicators, Changing a cycle or setting, During the first minute of a cycie, After the first minute of a cycle, Cancel, Adding items during a cycle, To add items
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
( CHINA ì
Use this cycle for china
and crystal. This cycle
uses a light wash and
gentle dry. During the
heated dry, the heating
element cycles on and
off.
Use
covered
detergent
dispenser
section.
Soil
Level
Sensed
Wash
Rinse
Main
Wash
Rinse
Final
Heated
Rinse
Dry
Time
(min)
Water
Usage
(gal/L)
Heavy
•
•
•
•
130°F
(54“C)
•
cycled
70*
6.5/24.6
Ught
•
•
•
130'F
(54“C)
•
cycled
60*
4.3/16.3
f
QUICK
]
t
RINSE
I
Use this rinse cycle for
rinsing dishes, glasses,
and silverware that will
not be washed right
away.
'
Do not
use
detergent
with this
cycle.
Soil
Lev«l
Sensed
Heavy
Light
Wash
Rinse
Main
Wash
Rinse
Final
Heated
Rinse
Dry
Time
(min)
IS
14
Water
Usage
(aal^)
4.3/16.4
2.2/8.2
NOTE: The sensor in your dishwasher monitors the soil
level. Cycle time and/or water usage can vary from the
numbers above as the sensor adjusts the cycle for the
best wash performance.
Canceling a Cycle
Anytime during a cycle, press
CANCEL)
DRAIN
CANCEL7DRAIN glows. The dishwasher pauses for about
5 seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely. The light goes off when the
dishwasher finishes the drain.
To stop the drain
You can press Cancel/Drain again to stop the drain
immediately. Remember to drain the dishwasher before
starting a new cycle.
NOTE: A small amount of water remains in the dishwasher.
This is normal.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear
all options and cycles.
Changing a Cycle or Setting
During the first minute of a cycie
Press a new cycle and/or options.
After the first minute of a cycle
1. Press
A
CANCEL
DRAIN
CANCEL/DRAIN glows. The dishwasher pauses for 5
seconds and starts a 2 minute drain (if needed). Let the
dishwasher drain completely.
2. Check the detergent dispensers. If the main wash cup
has opened and the detergent washed away, refill the
cups as needed.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
r
Adding Items During a Cycle
You can add an item anytime before the main wash starts.
Open the door and check the detergent dispenser. If the
main wash section is still closed, you can add items.
To add items
1. Lift up the door latch to stop the cycle. Wait for the
spraying action to stop before opening the door.
2. Open the door. If the main wash detergent dispenser is
still closed, add the item.
3. Close the door, but do not latch it. Wait 30 seconds for
the air in the dishwasher to warm up. This reduces the
amount of moisture escaping from the vent when
restarting a cycle.
4. Close the door firmly until it latches. The dishwasher
resumes the cycle after about a 5 second pause.
15