COBY electronic SNAPP CAM4000 - Manual (Page 9)

www.cobyusa.com Page 9
En
gl
is
h
Getting Started
Inserting a Memory Card
Use an SD/SDHC memory card to expand your digital video
camera’s available memory. The CAM4000 can accommodate
memory cards of up to 8GB. Install a memory card by insert-
ing it gently into the SD card slot on the underside of the
video camera.
To remove the memory card, press it further into the card slot
and then release. The card should automatically eject from
the slot. Grasp it by the edge and pull gently to fully remove.
To avoid data corruption, turn off the digital video camera
before inserting or removing a memory card.
Do not attempt to place any object other than an SD
memory card into the SD card slot. A compatible memory
card should slide easily into the SD card slot; if you en-
counter resistance, do not attempt to force the card in.
For information on formatting a memory card, please see
the Setup Menu section of this manual.