Warning, To remove light bulb, A caution – Kenmore ASPIRADORA 116.35923 User Manual
Page 18: Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LIGHT BULB REPLACEM ENT
^WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the unit.
Failure to do so could result in
electrical shock or personal injury
from the vacuum cleaner suddenly
starting.
TO REMOVE LIGHT BULB
1. Disconnect power cord from electrical
outlet.
2. Press han
dle release
pedal and lay
vacuum clean
er back.
3. Pry light
lens out at
slots as shown
on both sides.
Rotate lens up
and lift off.
A
caution
Do not use a bulb rated over 9W (13V).
During extended use, heat from the
bulb could overheat surrounding plas
tic parts.
4.
Remove the light bulb
by pulling straight out.
5. To replace the light
bulb carefully insert
fully into slot.
Note:
See
PARTS AND FEATURES
for
bulb number.
A CAUTION
Do not plug in or turn on until the vacu
um cleaner is completely reassembled.
6
.
To replace light
lens, place tab at front
of lens into slot. Rotate
lens down and firmly
snap into place.
18