Glass tray, Tones, Display messages – Kenmore 721.80869 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GLASS TRAY
PROBLEM
CAUSE
The glass tray will not
move.
• The glass tray is not correctly in place. It should be correct-side up and sitting
firmly on the center hub.
• The support is not operating correctly. Remove the glass tray and restart the
oven. If the hub still does not move, call Sears Service at 1-800-4-MY-HOME®.
Cooking without the glass tray can give you poor results.
TONES
PROBLEM
CAUSE
You do not hear
the programming or
end-of-cycle tone.
• You have not entered the correct command.
DISPLAY MESSAGES
PROBLEM
CAUSE
The display is flashing “: ” • There has been a power interruption. Reset the clock. (See the “Clock” section
on Page 12.)
If none of these items are causing your problem, call Sears Service at 1-800-4-MY-HOME®.
35