About the control settings – GE DBSR453 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

About the control settings.

ge.com

IMPORTANT: Clean the lint filter each time you use the dryer.

Fabric Care/Temperature

(on some models)

REGULAR

For regular to heavy cottons,

or COTTONS

REG. HEAT

MEDIUM

For synthetics, blends, délicates and items labeled

permanent press.

or EASY CARE

MED. HEAT

DEUCATES

On some models. For délicates, synthetics and items labeled

tumble dry low.

LOW HEAT____________________________________________________________________________

FLUFF For

fluffing

items without heat. Use the

TIMED DRY

cycle.

NO HEAT

Automatic cycles automatically detemiine fabric diyness.

Select LESS DRY if you want your clothes

slightly damp at the end of the diying cycle. Select

MORE DRY if you want them to feel drier. Timed

cycles run for a selected time.

§•
3

Drying Cycles

COTTONS

For cottons and most linens. For most loads, select

OPTIMUM DRY

some models) or select the

Preferred Regular Setting marked with an *.

EASY CARE/

For wrinkle-free, permanent press and delicate items, and knits.

PERMANENT

PRESS

TIMED DRY

Set the Cycle Selector at the desired drying time.

DAMP DRY

For leaving items partially damp.

DEWRINKLE

For removing wrinkles from items that are clean and dry or that are very lightly damp.

QUICK

FLUFF For freshening or fluffing up already diy clothing, fabrics, linens and pillows. Use with

FLUFF NO HEAT

Provides 10 minutes of no heat tumbling.

Start

—Close the diyer door. Select

START. Opening the door during operation trill stop the dryer.

To restart the dryer, close the door and select

START to complete the cycle.

Color Logic

(on some models)

Select the correct

FABRIC CARE

setting.

Match the particular color below the words

trirh the same color on the Cycle Dial.

Example:

Drying a load of clothing labeled

permanent press.

Choose the

FABRIC CARE

setting—^ftrr

this load it would be the

EASY CARE

MED. HEAT

(which is a particular color).

Turn the Cycle Dial to the area, that has

the same coloi as the

FABRIC CARE

setting you have chosen—firr this load it
would be the

EASY CARE AUTOMATIC.

§■

t/)

•3

C/J

This manual is related to the following products:

DBLR333 DBSR300