A. introduction, B. installation for desk or table top use, Installation for desk or tabletop – GE 2-9235 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION — DESK OR TABLE TOP
Follow these steps to connect your new
telephone for proper operation. Make sure you
have a modular telephone jack. A modular
(Universal Service Order Code) USOC: RJ11C
outiet (iilustrated) jack is required.
Instailation of this teiephone in iocations With
4-prong jacks or with hard-wired outiets wiil
require additional Converters (not included). The
dealer from whom you purchased your phone or
a telephone supply store can advise you
regarding the proper Converter.
A.
Introduction
Connect the Coiled Cord
Plug one end of the COILED CORD to the
HANDSET and plug the other into the
HANDSET jack on BASE unit. Piace the
HANDSET in the CRADLE.
.
B.
Installation for Desk or
Table Top Use
--------------- ^
—=>^—1
2. Connect the Telephone Line Cord
Plug the PHONE LINE CORD into the jack
on the bottom of the BASE UNIT. Then, plug
the PHONE LINE CORD into the teiephone
outlet. An RJ11C outlet jack (illustrated) is
required. If you don’t have an RJ11C, an
adapter can be purchased from any
telephone store.
0