GE 164D2966P127-I - Manual (Page 12)

m
Clock
CLOCK AND TIMER
NOTE: The clock must be set before the controls for
the lower oven will work.
When power is first connected to your cooking center
or after a power failure of any kind, the digitijl display
on both the microwave and lower oven control panels
shows lighted 8 s and 18’s plus all oven functions for
about 15 seconds.
How to Set the Clock
Quick Set-Clock
1. Press the CLOCK pad.
2. Press the INCREASE or DECREASE pad to
enter the time.
3. Press the START pad.
1. Press the CLOCK pad.
Then, all lights go off and “RESET” appears in the
upper display, and “PF” (for Power Failure) appears in
the lower oven display.
Press the CLEAR/OFF pad on the microwave control
panel and the microwave oven is ready to use.
Before using the lower oven, the electronic digital
clock must be set.
2. Press the INCREASE or DECREASE
pad to set the time of day.
3. Press the START pad. This enters the
time and starts the clock.
Timer
You may program the timer for time cooking or
other household activities for up to 11 hours and
59 minutes.
How to Set the Timer
1. Press the TIMER ON/OFF pad.
2. Press the INCREASE or
DECREASE pad to set the time of
day. If you make a mistake, press
the TIMER ON/OFF pad twice and
begin again.
The timer counts down in minutes, 1 minute at a time,
until the last minute is reached. The seconds will not '
be displayed until the last minute is reached.
When the timer reaches “ ; 0,” “TIMER” flashes in
the display.
3. Press the START pad.
After pushing the START pad,
the flashing colon tells you the
timer is counting down, although
the display does not change until
1 minute has passed.
4. When time is up, the oven control signals until you
press the TIMER ON/OFF pad. Display then shows
the time of day.
NOTE: The minute timer is independent of all the
other functions and it does not control the oven.
The CLEAR/OFF pad does not affect the timer.
12