Preparing to install the freezer, Freezer location, Clearances – GE OEFROST FCM5 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing to install the freezer.
.S’
0
■1
1
•Q
P
O
I:
V.
Qi
Read these instructions completeiy and carefully.
Freezer Location
Your freezer should be conveniently located for
day-to-day use in a diy, well-ventilated room.
Do not install the freezer where the temperature
will go below 0° F or above 110° F, because it will
not maintain proper temperatures.
Be sure to install your freezer on a. floor strong
enough to support it wdien it is fully loaded.
The freezer must be solid!}' positioned on the floor
if it is to fimction at its best. Shims may be used to
accomjrlish this wherever the floor is too uneven.
If the place selected for the freezer is damp or
moist, place 2 X 4’s (51 mm X 102 mm) under its
entire length to assure adequate suppoit.
Clearances
On all models, allow' S" (76 mm) on top, back
and sides for proper air circulation.
Si
§
10