GE 106761 - Manual (Page 6)

8 4 0 0 7 7 0 0 0 E v 0 3 1 1 / 9 / 0 0 1 0 : 2 6 A M P a g e 6
Optional Features
(continued)
Quick Storage Shield
- There is no need
to wait for the iron
to cool before
storing. Make sure
the iron has been
turned off and
unplugged.
Then, place the
Quick Storage
Shield on the
iron immediately after ironing.
CAUTION:
The soleplate may be hot, so
care must be used in placing the Quick
Storage Shield on the soleplate.
Caring for Your Iron
Iron
1. The water tank of your iron should
be emptied after each use. Turn
Temperature Control Dial to Off.
Unplug the iron and hold over a
sink. Slowly tilt pointed end of iron
down over sink. Water will run out
of water tank opening.
2. After iron has completely cooled,
wrap cord loosely around the iron
and store in an upright position. Do
not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal
rivets, or snaps, as these may scratch
the soleplate.
2. To clean occasional build-up on the
soleplate, wipe with a sudsy cloth. Do
not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel
rest position.