Ironing instructions, Automatic shutoff reset button and light, Fabric setting chart – GE 106761 User Manual
Page 5: Optional features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8 4 0 0 7 7 0 0 0 E v 0 3 1 1 / 9 / 0 0 1 0 : 2 6 A M P a g e 5
Fabric Setting Chart
Steam Setting Temperature Setting
OÉF
Nylon, Acrylic
Silk
ironing Instructions
Diy iron using spray if necessary.
Diy iron on the wrong side of the faliric.
Wool
Polyester
Rayon
Cotton, Linen
Use a press cloth and steam iron on the
wrong side of fabric.
lion while fabric is still damp.
Iron using spray if necessary.
For cotton, iron wliile still damp or use
spray. For linen, iron fabric on wrong side.
Optional Features
(on selected models)
Adjustable Steam Switch
- This switch
provides minimum
<(j)) steam for wool
or maximum ^
steam for linen.
Set the switch to
0 to change to
Dry Iron.
Automatic Shutoff Reset Button and Light -
The light comes on
when the iron is
first plugged in.
After one hour, the
iron will shut off
and the light will
go out. Push the
Reset Button to
turn iron back on.
Spray and Blast of Steam Buttons
- Push
Blast Button for an
extra blast of steam.
Push Spray Button
to release a fine
spray of water for
(difficult wrinkles in
cotton or linen.
Power On Light
-This light comes on
when the iron
is plugged in
and remains on
until the iron is
unplugged. The
light stays on even
if Temperature
Control Dial is
turned to Off.