COBY CX-CD400 User Manual
Page 8
WARNING
1. TO PREVENT FIRE OR SHOCK HAZARD.
2. DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.
3. DO NOT REMOVE COVER.
4. PILOT LAMPS SOLDERED IN PLACE.
5. NO USER SERVICEABLE PARTS INSIDE.
6. REFER SERVICING TO QUALIFIED SERVICE PERSONEL.
MAINTENANCE
CLEANING THE TAPE HEADS Clean the heads frequently to remove dust and
tape residue. Dirt on the heads will impair the sound quality of both recording
and playback. There are two methods for head cleaning
A. The simple method is to use a head-cleaning cassette, available at most audio
stores. Follow the instructions supplied with the closing cassette.
B. The heads can be also cleaned manually.
1
Depress the EJECT button of Tape A and Tape B in order to open the
cassette.
2
Depress the PLAY button of Tape A and Tape B.
3
Wipe the heads with a soft not – free cloth or cotton swab that has
been partially soaked in alcohol, until the heads are free of all dirt and residue
deposits.
SPECIFICATIONS
GENERAL
Power Supply :
AC 230V ~ 50Hz AC 110/220V ~ 60/50Hz (Option) DC 12V
= 8 x “D” (UM-1/R-20) size batteries (not included)
Frequency Range: AM 530 - 1710 KHz FM 88 - 108
MHz SW 4 - 12 MHz (Option)
Power Consumption: 19 Watts
RMS Output: 2.2 Watts per channel
Remarks: The manufacturer reserves the right to amend the specification without
prior notice. Version: Rev. 2 (Toshiba IC)
CX400 Peak Output Power: 50W total (4 Ω at 1 kHz, THD 10%)