beautypg.com

Trouble shooting, General, Disc player – Clarion CZ501 User Manual

Page 25

background image

24

English

6. TROUBLE SHOOTING

GENERAL

Problem

Cause

Measure

Unit can not

power on.

Unit fuse blown.

Replace with new fuse of correct rating.

Car battery fuse blown.

Replace with new fuse of correct rating.

Unit can not

power on.
Nothing happens

when buttons are

pressed.
Display is not

accurate.

The microprocessor has

malfunctioned due to noise, etc.

Turn off the power and remove the DCP.

Press the [RESET] button with a thin rod.

Note:

When the [RESET] button is pressed, turn off

the ACC power.*

* When the [RESET] button is pressed,

frequencies of radio stations, titles, etc. stored

in memory are cleared.

Remote control

does not work.

Battery depleted.

Change the battery.

Battery installed incorrectly.

Install the battery correctly.

No/low audio

output

Improper audio output connection. Check wiring and correct.
Volume set too low.

Increase volume level.

Speakers damaged.

Replace speakers.

Heavily biased volume balance.

Adjust the channel balance to center position.

Speaker wiring is in contact with

metal part of car.

Insulate all speaker wiring connections.

Poor sound quality

or distortion

Non-standard disc used.

Use a standard disc.

Speaker power rating does not

match unit.

Replace speakers.

Wrong connections.

Check wiring and correct.

Speaker is shorted.

Check wiring and correct.

Unit resets itself

when engine is off.

Incorrect connection between

ACC and Battery.

Check wiring and correct.

DISC Player

Problem

Cause

Measure

Disc cannot be

loaded.

Another disc is already loaded.

Eject the disc before loading the new one.

There is an object installed inside

the unit.

Remove the object inside the unit.

Sound skips or is
noisy.

Compact disc is dirty.

Clean the compact disc with a soft cloth.

Compact disc is heavily scratched

or warped.

Replace with a compact disc with no

scratches.

Sound is bad when

power is first turned

on.

Condensation may form on the

internal lens when the car is parked

in a humid place.

Let dry for about 1 hour with power on.

CMB1525194A(Z501) manual.indb 24

2010-11-26 15:51:05