Clarion CZ501 - Manual (Page 17)

16
English
The CZ501 offers iTunes ® Tagging, which
allows the user to "Tag" songs playing on HD
Radio™ stations for purchase later through
iTunes. When press [ISR
] button, the unit
stores the title and artist song information that
can then be transferred to your iPod when
connected to the unit. A list titled "Tagged"
will appear in iTunes, allowing you the option
to purchase your tagged songs.
Note:
“ i T u n e s ®
Tagging” function works by
connecting THD301 (sold separately).
iPod compatibility
For detailed information on the playable iPod
models, see our home page: www.clarion.
com
Note:
• iPhones can also be connected to this
system and “iPod” appearing in this
manual should be referred to as “iPod/
iPhone”.
• This system will not operate or may
operate improperly with unsupported
versions.
Tagging music
To begin tagging music, tune to an HD Radio
station. The DIGITAL icon at the display must
be illuminated, indicating a digital station
is being received. TAG icon lights up when
Tagging function is ready. Press the [ISR]
button on the unit. The tagging function is
highly depends on the receptions of the radio
station. If the channel reception is insufficient,
it will effect the operation of the tagging
function.
“
Stored Tag ## of 64” will appear in the
display. The song information is saved to the
unit memory until an iPod is connected. You
can tag up to 64 songs before the tags must
be transferred to an iPod or deleted. When
the Tag memory reaches capacity (64 tags)
the bottom of the screen displays “ Memory
Full
”.
Table 5: TAG Messages
Tag Message Reason
S T O R E D T A G # #
OF 64 If the Tag data is ready, and
[ISR
] button is pressed
SENDING TAG ## Tag data is sending to iPod
MEMORY FULL Tag storage is full
TAG DATA IS NOT
AVAILABLE Tag data is not available
IPOD FULL iPod memory is full
TAG NOT SUPPORT When connect and press
[ I S R ] b u t t o n , t h e i P o d
without Tagging function
Note:
Tags saved to your iPod can be managed
using the iTunes software, available at www.
apple.com/itunes.
Downloading tags to your iPod
To download tags to your iPod, plug an
iPod into the unit. All existing tags are
automatically transferred to the iPod and
deleted from the head unit’s memory. If an
iPod is connected when a song is tagged,
the Tag will be immediately transferred to the
iPod.
Note:
When transferring Tags to an iPod, the unit
must remain in HD Radio mode. To purchase
tagged songs, you must sync your iPod to
iTunes and then click the “Tagged” list on the
left side of the iTunes software screen. Click
the “view” button for purchasing information.
Note:
1. How to enter the iTunes tagging function?
“TAG” and “DIGITAL ” light up when
Tagging function is ready, press [ISR]
button to start iTunes Tagging.
2. What is seen on the radio’s display to let
me know I have tagged the tune?
Press [ISR ] button to show “ STORED
TAG ## OF 64
”. After connect to a iPod,
the display shows “ SENDING TAG ##
”.
If no connection, the display will show
“
STORED TAG ## OF 64
”. You could
save 64 Tag into memory in total. When
you connect to a iPod, Tag information
will be saved in the iPod, and the data in
memory will be cleared.
3. Then how do I get the tagged tune from
my iPod to the computer?
If you have install iTunes, connect your
iPod to your computer and buy songs
online.
iTunes
®
Tagging
CMB1525194A(Z501) manual.indb 16 2010-11-26 15:51:03