Adjust particle sensor – Coway AP-1008BH User Manual
Page 16
15
ADJUST PARTICLE SENSOR
1. With the mood mode button pressed down,
insert the power plug in the electric outlet.
2. With a tone ringing twice, the current sensitivity
indicator of the sensor blinks.
3. Adjust the sensitivity by pressing the speed button.
The sensitivity of the sensor is displayed by
ablinking airflow speed indicator.
4. After adjustment, the sensitivity of the pollution
sensor is set when the power button is pressed to
turn the product off or automatically set when 20
seconds have passed in the setting mode.
How to Adjust the Sensitivity of the Pollution Sensor
When the product is shipped out, the pollution sensor is set to standard sensitivity. If the pollution level
stays at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour when
the air does not seem clean, users can adjust the sensitivity of the pollution sensor as follows.
Sensitive
Standard
Insensitive
Speed step 1
Speed step 2
Speed step 3