Whirlpool 311435 - Manual (Page 4)

DOOR ADJUSTMENT (IF NEEDED) 4, CHECKING
Open oven door and loosen the upper adjusting screw
(seeViewe) on the side that needs adjustment.
i'. Close oven door and loosen the lower adjusting screw.
J. Adjust door up and down as needed.
<5. Retighten the lower adjusting screw.
t - Open oven dooi and retighten the upper adjusting
screw.
6. Close oven door and double check for proper door
alignment.
ADJUSTING
SCREWS
OVEN —
DOOR
CAUTION; Do not touch the elements. They may
be hot and you may get burned.
A. THERMOSTAT
1. Preheat — Turn selector switch to PREHEAT and set
the thermostat to 350® BAKE temperature. The
bottom oven element should become red and the
indicator light should glow. The upper oven element
should become hot but NOT become red.
2. Broil - Turn selector switch to BROIL and set
thermostat to a high temperature position. The top
element should become cherry-red and the indicator
light should glow.
3. Bake - Turn selector switch to BAKE and set thermo­
stat to 350®. The bottom element should become red
and the indicator light should glow.
B. CLOCK
Refer to the Use and Care Guide for proper operation of
the clock.
C. ROTISSERIE (if optional kit has been installed)
1. Position the spit bar on special rack.
2. Insert the point of spit bar into hole in the back of the
oven.
3. Rotation starts upon insertion of spit bar.
View e
Whirip^l
r£C//-GA^f
FRANCHISED SERVICE
In the event your WHIRLPOOL appliance should need service, call the dealer from whom
you purchased the appliance or a WHIRLPOOL franchised TECH-CARE® service company.
He is in the Yellow Pages of your telephone directory listed under "Appliances-Household-
Major - Service and Repair." You can also obtain his name and number by dialing, free, within
the continental United States the Whirlpool COOL-LINE® Service (800) 253-1301. When
calling from Michigan, dial (800) 632-2243; from Alaska or Hawaii, dial (800) 253-1121.
Dial just as you normally dial long distance. A special operator will tell you the name and
number of your nearest Whirlpool TECH-CARE service outlet. During normal working hours.
Whirlpool consultants at this same number will also answer any questions about operating or
maintaining your appliance not covered in your Use and Care Guide.
Learn the benefits of using TECH-CARE service for maintaining the quality originally built
into your WHIRLPOOL appliance.
WHIRLPOOL CORPORATION BENTON HARBOR, MICHIGAN 49022
Part No. 311435 Rev. D