Stopping/restaiting your washer, Stopping/restarting your washer – Whirlpool 7LSC9245BN0R User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

O P E R A T I N G Y O U R W A S H E R
8. (OPTIONAL STEP) If desired, select
Extra Rinse “On” to add an additional
rinse to the end of the wash cycle.
• Depending on your washer model, you
may have either a pushbutton or
CLEAN TOUCH^*« Extra Rinse
Selector.
• Use the Extra Rinse option when using
extra detergent for the Super Wash
cycle or any of the following cycles:
Heavy, Permanent Press, or Delicate.
The Bdra Rinse option is not offered in
the Regular cycle.
• Before a cycle starts, select Extra Rinse
“On”. The washer automatically adds an
extra rinse and spin to the cycle.
• If you do not want an extra rinse and
spin, or if you are using the Regular
cycle, select Extra Rinse “Off".
NOTE: On CLEAN TOUCH models, the
“On” indicator lights when Extra Rinse
is selected.
9. Push in and turn the Cycle Control
Knob clockwise. Stop when the indica
tor on the outer ring points to the
number in the wash cycle you want.
• The numbers are minutes of wash time.
• The cycles are described on page 10.
Stopping/restaiting your washer
If necessary, you can stop your washer
during a cycle to add more clothes.
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle
Control Kriob.