Soak cycle, Using rinse and spin, Using drain and spin – Whirlpool RAB3121EW0 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
OPERATING YOUR WASHER
Soak cycle
(on some models)
The Soak cycle features brief periods of
agitation and soak time to help remove heavy
soils and stains that need pretreatment.
• Use warm water when soaking laundry. (Hot
water can set stains.) See pages 13-15 for
stain removal information.
• Use the amount of detergent or presoak
additive recommended by manufacturer.
• After the Soak cycle ends, add detergent and
set a new wash cycle.
Soak cycle
Using rinse and spin
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn clock
wise to the dot on the dial, as illustrated.
2. Pull Cycle Control Knob out. The washer will
fill to selected load size, agitate, drain, and
spin.
Using drain and spin
A drain and spin may help shorten drying times
for some heavy fabrics or special-care items by
removing excess water.
1. Push Cycle Control Knob in and turn clock
wise until indicator points to the bar on the
dial, as illustrated.
2. Pull Cycle Control Knob out. The washer will
drain and spin.