Operating instructions, Starting your washer, Select a load size – Whirlpool 6LA58OOXT User Manual

Page 4: Select water temperature, Starting your washer -5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating Instructions

Starting your washer

Be sure to measure and add detergent, then place a sorted load in the washer before
starting it.

INFINITE WATER SAVING

LOAD SIZE SELECTOR

HOT

WARM

COLD

WARM

COLD

COLO

COLD

ENERGY SAVING

TEMPERATURE SELECTOR

1. Select a load size
• Position the Load Size Selector at the

setting that describes the size of load
you want to wash.

• The selector can be set anywhere on

or between EX SMALL (a few small
items) and EX LARGE (a full load).

• To change the water level after the

washer has started to fill, turn the
selector to RESET, then to the desired
water level.

NOTE: For best washing results, items
should move freely in the washer. Do
not overload the washer or choose a
water level that is too low for your
wash load.

For best results with permanent

press clothes, use the EX LARGE water
level.

Reduce wash time when using EX

SMALL or SMALL water level settings.
Loads with only a few small items need
less wash time for best results.

2. Select water temperature

• Match the water temperature to the

type of fabric and soils being washed.

• The top temperature is the wash

selection and the bottom temperature
is the rinse selection.

NOTE: Use warm wash water with

the PERMANENT PRESS or KNITS/
GENTLE Cycles.

For heavily soiled permanent press

or knit clothes, pre-wash or pre-soak
before washing in warm water.

ALWAYS use cold rinse water for

permanent press fabrics.