To use the washer again, Winterizing – Whirlpool 3LA58OOXS User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Service or performance problems caused by the use of any product

not manufactured by Whirlpool Corporation are the responsibility of

the manufacturer of that product.

Winterizing

Because some water stays in the washer,

freezing can cause a lot of damage. If your washer
is

stored or moved during the cold weather...

1. Shut off both water

taps. Disconnect

and drain water inlet
hoses.

Puta quart of R.V
type antifreeze in
the basket.

3. Set the washer for a

DRAIN and SPIN
(see page 12). Let it
run for about 30
seconds to mix the
antifreeze and

water.

To use the washer again...

1. Flush water pipes and hoses.

2. Connect hoses to the washer.
3. Turn on the water taps.

4. Run the washer

through a com

plete cycle with

one cup of deter
gent to clean out
the antifreeze.