Select water 2. temperatures, Load sizes and water eevels, Starting your washer – Whirlpool LA5570XP User Manual

Page 4: Select a 1. load size

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting 1 Measure and add detergent,

your washer:

2 Place sorted load in washer.

3. Start washer.

Select a

1. LOAD SIZE

Turn the knob to point at a setting

that describes the size of load you

want to wash.

Set the knob anywhere on or be

tween EX SMALL (a few items) and

LARGE (a full load).

NOTE: Use the LARGE water level

tor best permanent press results.

Select WATER

2. TEMPERATURES

• Match the wash water temperature

to the type of fabrics and soils being

washed.

• A l l rinses are cold.

IMPORTANT: Use warm water

with the PERM’T PRESS or KNITS/
GENTLE cycles. For heavily
soiled permanent press or knit
clothes, pre-wash or pre-soak

before washing in warm water.

LOAD SIZES AND WATER EEVELS

For best cleaning results, the

load must be able to move freely

in the water. Too big a load or too

little water can cause wear or

tearing of load items.

•Approximate

fill with load.

CAUTION:

DO NOT

OVERLOAD WASHER.

LARGE (17.3 gals./65.5 L)*
MED (13.4gals./50.8L)‘

EX SMALL (9.5 gals./36.0L)*