Whirlpool LA5588XY User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

other Operating Instructions
Continued

To re-use wash water:

1. Set the Cycle Control Knob on

SUDS RETURN. Do not add the
load items at this time.

2. Pull the Cycle Control Knob out.

The washer will pump most of the
wash water from the storage tub
back into the washer basket.

3. After the wash water is pumped

back into the washer, push in the
Cycle Control Knob.

4. Add about Vz the recommended

amount of detergent.

5. Add the load items.

6. Turn the Cycle Control Knob

clockwise to the desired cycle and
wash time.

7. Pull out the Cycle Control Knob to

start the washer.

8. Drain the storage tub. About 1 inch

(2.5 cm) of wash water remains in

the tub after the fill. The water
contains soils that have settled out.

NOTE: The end of the suds return
hose has a plastic strainer to prevent

objects from being pulled into the
washer during SUDS RETURN.