To change light below ice bin, To change light behind quick freeze – Whirlpool 3ED22DQ User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR REFRIGERATOR
To change light below ice bin:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
To change light behind quick freeze
compartment (on some models):
1. Disconnect refrigerator from power
supply.
2. Lift and secure quick freeze compartment
door.
3. Remove light shield by pulling top for
ward.
4. Replace bulb with a 40-watt appliance
bulb.
5. Replace light shield.
6. Reconnect refrigerator to power supply.
To change dispenser area iight:
1. Disconnect refrigerator from power
supply.
2. Reach through dispenser area to remove
bulb.
3. Replace with a heavy-duty 10-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
Light
below
ice bin
compartment
Dispenser area light
21