Front view (door not shown), Whirl, Recessed area instructions – Whirlpool 3358969 User Manual

Page 5: If you need assistance

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recessed area

instructions

This washer may be installed in a

recessed area or closet.

The installation spacing is minimum

allowable.
Additional spacing should be
considered for ease of installation
and servicing.
If closet door is installed, the
minimum air openings in top and
bottom are required. Louvered
doors with air openings in top and
bottom are acceptable.

Companion applianoe spacing
should be oonsidered.

If you need

assistance...

Call your dealer or local
authorized service company.

When you call, you will need the
washer model number and serial

number. Both numbers are on the

serial/rating plate looated under
the washer lid and on the top of
the washer.

* Additional clearances for wall, door

and floor moldings may be required.

Front view

(door not shown)

Side view

Minimum installation spacing

Front view

Part No, 3358969

Whirl

Prepared by Whirlpool Corporation. Benton Harbor, Michigan 49022

Printed in U.S.A,