Exterior moisture control, Changing the control settings – Whirlpool 8ET18DK User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
• Use the OFF setting when humidity is low.
• Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
EXTERIC )R MOISTURE C ONTROL
OFF
ON
Changing the control settings
If you need to adjust temperatures in
• Adjust the Refrigerator Control first,
refrigerator or freezer, use the settings listed
• wait at least 24 hours between adjustments,
in the chart below as a guide.
, adjust the Freezer Control if needed.
CONDITION;
REASON:
RECOMMENDED
CONTROL SETTINGS:
Refrigerator Freezer
Refrigerator
section
too warm
• Door opened often
• Large amount of food added
• Room temperature too warm
4
A
Freezer
section
too warm
• Door opened often
• Large amount of food added
•Very cold room temperature
(can’t cycle often enough)
3
C
Refrigerator
section
too coid
•Controls not set correctly
for your conditions
2
B
ice not
made fast
enough
• Heavy ice usage
•Very cold room temperature
(can’t cycle often enough)
3
C
Both
sections
too warm
• Door opened often
• Large amount of food added
•Very warm or very cold room
temperatures
4
B