Starting your washer, Load sizes and water levels, Select a – Whirlpool LA4400XS User Manual

Page 4: Load size select cycle and water temperature, Start the washer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Starting your washer

Before starting your washer:

1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.

Select a

LOAD SIZE

Select CYCLE and

WATER TEMPERATURE;

Start the washer

• Turn the knob to point at a setting

that describes the size of ioad you
want to wash.

• Set the knob anywhere on or

between small (a few items) and
large (a full load).

NOTE: Use the LARGE water level
for best permanent press results.

A. Push in the Control Knob and

turn It to the right. It must be

pushed in and turned oniy

clockwise.

LOAD SIZES AND
WATER LEVELS

For best cieaning results, the

load must be able to move freely
in the water. Too big a load or too
little water can cause wear or

tearing of load items.

CAUTION:

To select wash water temperature,

DO NOT

stop on the area in the selected

OVERLOAD WASHER.

cycle marked H (hot), W (warm)
or C (cold).

• 1 LARGE

Match the wash water tem

(17.2gals./65.1L)*

perature to the type of fabrics

\ ; I

SMALL

and soils being washed.

(9.5 gals./36.0 L)*

Recommended wash tem
peratures can be found in your

'Approximate

fill with load.

“Laundry Guide.”

All rinses are cold. Cold rinses
save energy and help prevent
wrinkles from setting into fabrics.