Using the self-cleaning cycle, Before you start, Special cautions – Whirlpool RB26OOXK User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

USING THE SELF-CLEANING CYCLE

The self-cleaning cycle uses very high heat to burn away soil. Before

you start, make sure you understand exactly how to use the cycle
safely.

BEFORE YOU START

DO NOT
Clean Seal

1, Clean areas that may not be cleaned

during the cycle. Use hot water and deter

gent or a soapy steel-wool pad on...

• the frame around the oven
• the inside of the door, especially the part

outside the oven seal.

DO NOT try to clean the fiberglass seal. DO
NOT move it or bend it.

Remove any pots or pans you may have
stored In the oven. They can’t stand the
high heat.

Wipe out any loose soil or grease. This will
help reduce smoke during the cleaning
cycle.

4. Make sure the motor socket ccver is

closed if your oven has a rôtisserie.

SPECIAL CAUTIONS

DO NOT block the vent
during the cleaning cycle.
Air must move freely for
best results.

DO NOT touch the oven
during the cleaning cycle
...it can burn you.

DO NOT use commercial
oven cleaners in your oven.
Damage to the porcelain
finish may occur.

DO NOT force the Lock
Lever. The lever is designed

to stay locked until the
oven is cool enough to
safely open.

DO NOT use foil or other
liners in the oven. During
the cleaning cycle, foil
can burn or melt.