Whirlpool RT14GD - Manual (Page 8)

U S I N G Y O U R R E F R I G E R A T O R
Using Your Refrigerator
In This Section
Page Page
Setting the temperature control.... ....8 Changing the light bulb................... .....11
Adjusting the refrigerator shelves ....9 Reversing the door swing................ .....12
Removing the crispers and cover. ....9 Understanding the sounds you
Using the ice cube trays....................... ..10
may hear............................................
.....12
Using the automatic ice maker............ ..10
Saving energy...................................
.....12
To obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section tells you how to set the temperature control, remove and adjust some
of the features in your refrigerator, and how to save energy.
Setting the temperature control
The Temperature Control is in the refrigera­
tor. It controls the temperature in both the
refrigerator and freezer compartments.
When you plug in the refrigerator for the first
time;
1. Set the Temperature Control to 3 (nor­
mal). Temperature Control adjustments
range from 1 (warmest) to 5 (coldest).
NOTE; Turning the Temperature Control
to OFF stops cooling in both the refrigera­
tor and freezer compartments, but it does
not disconnect the refrigerator from the
power supply.
2. Give the refrigerator time to cool down
completely before adding food. This could
take several hours.
3. Adjust the Temperature Control to have
food as cold as you like. The settings
indicated above should be correct for
normal, household refrigerator usage.
NOTE: The built-in exterior moisture control
continuously guards against moisture build­
up on the outside of the refrigerator cabinet.