Whirlpool 900 - Manual (Page 15)

Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. (Some cycles share the same pad.) Turn the cycle control knob to the
desired cycle.
CYCLE
A shows what each cycle includes
WASH RINSE
MAIN
WASH RINSE
FINAL
RINSE DRY
CYCLE
TIME
(Minutes)
POTS-N-PANS
Double wash for
maximum cleaning
of cooked-on or
baked-on foods.
• The water heats to 140°F (35°C) in
both washes (marked^).
• The water heats to 140°F (35°C) in
the final rinse (marked i^).
✓ / ✓ tt / 76*
HEAVY
(on some models)
I Double wash for
■ cleaning heavily
I soiled loads.
• Select Hi-Temp Wash to heat water
in the main wash (marked ^).
• The water heats to 140°F (35°C) in
the final rinse (marked^).
/ / /t ✓ tt / 76*
NORMAL
Double wash for
normal, everyday
soiled loads. (The
Energy Guide label
is based on this cycle.)
• Select Hi-Temp Wash to heat water
in the main wash (marked'f).
• The water heats to 140°F (35°C) in
the final rinse (marked ^ 1 ^).
✓ / / 66
*
' Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The cycle control knob does
not move while water is being heated.
continued on next page
15