Whirlpool 3ED20PK - Manual (Page 9)

Removing the freezer shelves
To remove the shelves:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
To adjust the shelves:
1. Remove shelf as above.
2. Remove supports by sliding upward.
3. Replace supports on desired level.
4. Replace shelf.
NOTE:
The cup-shaped supports go in the back
of the freezer.
Adjusting the shelf glide
The shelf glide can be used to secure odd­
shaped items or to separate other items.
1. Grasp glide.
2. Slide guide along track.
NOTE:
Shelf glide cannot be removed.
Slide along
track
Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push glass insert up from bottom, then slide
out with both hands.
2. Lift front of cover frame.
3. Lift cover frame out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator, then lower front into place.
2. Slide back of glass insert into place, then
lower front into place.
Pull out to the stop,
lift the front
and pull again.
Lift the cover
front, then
the back.