Whirlpool 3ED20PK - Manual (Page 10)

USiJ^ R£FflAC^MTO#r
Removing the meat drawer and cover
To remove the meat drawer;
. Slide the meat drawer out to the stop.
; . Lift the front.
C. Slide meat drawer out the rest of the way.
Replace in reverse order.
To remove the cover:
■ ■ . Remove crisper, crisper cover and meat
drawer.
f. Tilt front of cover up, lift at back and pull
straight out.
3. Replace in reverse order.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and the refrig­
erator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.
Slide the control to let more or less cold air
through.
Removing the freezer bin
For proper air movement, keep the freezer bin in
place when the refrigerator is operating.
To remove the bin:
1. Slide bin out to the stop.
2. Lift bin at the front to clear the stop.
3. Slide bin out the rest of the way.
To replace the bin:
1. Place bin on the slides.
2. Make sure the stops clear the front of the
slides.
3. Slide bin in.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
DQom
mnnrrt
10