Lint screen, Lint removal – Whirlpool 3LG5706XP User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lint screen
Clean the lint screen before each load.
A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the lid and pull the lint screen
straight out.
WARNING: DO NOT
run the
f.- ’ ' dryer with the lint screen
loose, damaged or missing.
Doing so can cause over
heating, can damage fabrics and
can be a
FIRE HAZARD.
with your fingers.
DO NOT rinse or wash the screen.
Push the screen firmly back into
place.
Lint removal
Lint can gather inside the dryer and create a fire hazard.
This lint
should be removed every 2 to 3 years, or more often, depending on
dryer usage.
Funnel
GAS DRYERS
Cleaning should be done only by a qualified person.
WARNING:
• Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
• Avoid injury or damage - do not
put hands inside cabinet.
• Make sure dryer is cool.
1. Remove lower access panel.
2.
Avoid damaging wires,
thermostats, funnel or igniter.
3.
Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner.
4.
Replace panel; reconnect and
re-level dryer.
8